Categories
- New products
- Second Hand
- Special offers
- Leadmusic Exclusives
- Electric Guitars (108)
- Effect Pedals & Multi Effects (203)
- Guitar Amplifiers (66)
- Basses (33)
- Bass Amplifiers (29)
- VacuumTubes for Amplifiers (13)
- Acoustic Instruments (28)
- Accessories (68)
- Computer & Software / PA-Equipment & Microphone (34)
Brands
- Akai
- AKG
- Alembic
- Amistar resophonic
- Ampeg
- Amplitube
- Ashdown
- Ayers
- Bad Cat
- Banzai musical products
- BBE
- Behringer
- Beyerdynamic
- Blackstar
- Bogner Custom Shop
- Boss
- Brian Moore
- Brunetti
- Bulldog Amplification
- Burkey
- Carvin
- Charvel
- Collings
- Cordial
- DBZ Guitars
- Dean
- Digitech
- DR Strings
- Dunlop
- EBow
- Egnater
- Electro-Harmonix
- Elixir
- Elmwood
- Elrick Bass Guitars
- EMG Pickups
- Empress
- Epifani
- Ernie Ball
- ESP Guitars
- EVH
- Fender Guitars
- Finger Ease
- Fishman
- Frantone
- Fryette
- Fulltone
- G&L
- Gallien Krueger
- George L's cables
- Gibson
- Gigmate
- Godin
- Greg Bennett
- Guild Guitars
- Harvest
- Hercules stand
- Ibanez
- IK Multimedia
- ISP Technologies
- Jackson
- Jacques Stompboxes
- James Trussart
- König&Meyer ( K&M )
- Korg
- Kramer
- Lakland
- Laney
- Larrivee
- Lehle
- Levy's leather
- Line 6
- LTD
- Mark Bass
- Mesa Boogie
- MI Audio Amplification
- MI Audio Effects
- MJ Guitars
- Modtone Effects
- Mono case
- Morley
- Mullard
- Music Man
- OLP
- Peavey
- Pedal Pad
- PRS Guitars
- Radial
- Randall
- Rayco Resophonics
- Rickenbacker
- RMC
- Rockbag
- Ruokangas Guitars
- Schertler
- Seymour Duncan Pickups
- Shure
- String Swing
- Suhr Guitars
- Sustainiac
- Tanglewood
- Taylor Guitars
- TC Electronic
- Tech Soundsystems
- Tom Anderson
- T-REX
- Tung Sol
- U.S Masters Guitar Work
- Ultimate Supports
- VG's
- VHT
- Vigier
- Visual Sound
- Voodoo Lab
- Vovox
- Walden Guitars
- Warwick Instruments
- Xotic Effects
- Z Vex
- ZOOM
- ZT Amplifiers
Information:
Guitarists and bassists use a lot of different effectpedals, analog as well as modern digital effects. Most of the effectpedals need 9V batteries, which are expensive and don't last long. An adapter is a common solution and a good alternative. However using several effectpedals together will result in a jumble of cables. Next to that a hum free adapter is expensive and may power only a few effectpedals. Although most pedals need 9V the number of pedals that use 12 or 18V and draw higher currents is increasing. For that reason you need special adapters. Burkey noticed these problems and invented a solution: one central powersupply that serves almost every effectpedal in the world. The Flatliner PRO is specially made for use on pedalboards. Compact, rugged and indestructable built to guarantee many, many years of carefree power. No (empty) batteries, no humming adapters with a tangle of cables on the floor. With our Flatliner you have a well-organized and reliable setup ready for the wildest performances. The Flatliner features 9 completely isolated outputs, ready to power a large pedalboard. Voltages may vary from 3-24 V DC and the Flatliner can even power 9/12 VAC pedals.
Specifications:
* 9V DC : 5 Outputs 9 Volt DC, 200 mA, short-circuit protected with a current-limitation on 200 mA
* 12V DC : 1 Output 12 Volt DC, 200 mA, short-circuit protected with a current-limitation on 200 mA
* 3-9V DC : 1 Output variable ca. 3-9 Volt ; V = voltage, R = resistance ( 0…20 Ohm)
* 3-12V DC : 1 Output variable ca. 3-12 Volt ; V = voltage, R = resistance ( 0…20 Ohm)
* 9/12V AC : 1 Output 9 or 12VAC*, capacity 1000 mA This output is protected with a 1AT fuse (on the rear panel)
* Polarity : All outputs are center negative
* Fuses : 1AT:1A-fuse (9VAC output)
160mAT:2-160mA fuses (230 VAC fuses)
* Mains : 230VAC 50/60Hz for European power. Configurable for 120VAC/60hz for US power
* Capacity : 33 Watts max
* Weight : 1960 gr
* Dimensions : (LDH)233x110x72 mm
* Warranty : 24 months
* Your Flatliner comes with 9 cables, 7 regular and angled, 1 for reversed polarity, 1 for AC output.
Guitarists and bassists use a lot of different effectpedals, analog as well as modern digital effects. Most of the effectpedals need 9V batteries, which are expensive and don't last long. An adapter is a common solution and a good alternative. However using several effectpedals together will result in a jumble of cables. Next to that a hum free adapter is expensive and may power only a few effectpedals. Although most pedals need 9V the number of pedals that use 12 or 18V and draw higher currents is increasing. For that reason you need special adapters. Burkey noticed these problems and invented a solution: one central powersupply that serves almost every effectpedal in the world. The Flatliner PRO is specially made for use on pedalboards. Compact, rugged and indestructable built to guarantee many, many years of carefree power. No (empty) batteries, no humming adapters with a tangle of cables on the floor. With our Flatliner you have a well-organized and reliable setup ready for the wildest performances. The Flatliner features 9 completely isolated outputs, ready to power a large pedalboard. Voltages may vary from 3-24 V DC and the Flatliner can even power 9/12 VAC pedals.
Specifications:
* 9V DC : 5 Outputs 9 Volt DC, 200 mA, short-circuit protected with a current-limitation on 200 mA
* 12V DC : 1 Output 12 Volt DC, 200 mA, short-circuit protected with a current-limitation on 200 mA
* 3-9V DC : 1 Output variable ca. 3-9 Volt ; V = voltage, R = resistance ( 0…20 Ohm)
* 3-12V DC : 1 Output variable ca. 3-12 Volt ; V = voltage, R = resistance ( 0…20 Ohm)
* 9/12V AC : 1 Output 9 or 12VAC*, capacity 1000 mA This output is protected with a 1AT fuse (on the rear panel)
* Polarity : All outputs are center negative
* Fuses : 1AT:1A-fuse (9VAC output)
160mAT:2-160mA fuses (230 VAC fuses)
* Mains : 230VAC 50/60Hz for European power. Configurable for 120VAC/60hz for US power
* Capacity : 33 Watts max
* Weight : 1960 gr
* Dimensions : (LDH)233x110x72 mm
* Warranty : 24 months
* Your Flatliner comes with 9 cables, 7 regular and angled, 1 for reversed polarity, 1 for AC output.
